AN-HD3503 / HD-CVI Tester

CVI camera tester

CVI camera tester

Specifications:
1)3.5-inch screen display, 480 (RGB) x 320 resolution
2) Low power consumption, working time lasts 11 hours
3) LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
4) CVI/TVI /AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
5) Enhanced color bar generator, PAL/NTSC multi-system color bar video generator (eight-system switchable, transmit/receive eight-system colorful images)
6) LED flashlight
7) HD coaxial control, PTZ control, color bar generator shortcut key
8) F1, F2 user-defined key
9) Visual fault locator, to test fiber’s bending and breakage * (optional)
10) Digital multi-meter, DC and AC voltage measurement, resistance measurement continuity test, diode measurements, capacitance measurement * (optional)
11) Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables * (optional)
12) Ping test, PING is the most conventional network debugging tools, it is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct
13) IP address scan IP address scan can quickly search for connected IP cameras or another network device IP address
14) POE voltage tests the PoE voltage from a PoE switch unit will clearly display the voltage for each wire in an Ethernet cable
15) Port finder, it will enable the installer to easily and quickly find the connected port for an Ethernet cable
16) Link monitor check if the new setting IP address is occupied
17) TDR cable test, TDR break-point and short-circuit measurement * (optional)
18) PTZ control and PTZ protocol analysis
19) Cable test, test LAN cable or telephone cable, UTP cable, cable type and the sequence of wires will be displayed
20) Support more than 30 protocols, such as Pelco-D, Pelco-P, Samsung
21) Support RS232/RS485,rate 600 – 115200bps adjustable
22) Built in lithium ion polymer battery (3.7V DC 3000mAh)
23) Image display and data control integration
24) Handheld HD coaxial tester, easy to carry and operation
25) Optical power meter, test fiber loss and value * (optional)